Archive for Mei, 2018

h1

Lakka – DIY Retro Arcade on Linux

Mei 13, 2018

Assalamualaikum Wr Wb

Kota Kembang,

Pure murni isi dari halaman :

http://www.lakka.tv/get/windows/generic/install/first-boot/

———————————————————-

 

Setup Lakka on the PC

Follow the following steps:

  1. Plug in the USB installer into the PC you want to setup
  2. Wire your PC to a Display or TV
  3. Power on your Display or TV
  4. Plug in an Ethernet wire (optional)
  5. Plug in a supported joypad into one of your USB ports on your PC
  6. Power on your PC
  7. Enter BIOS and allow booting of a USB (optional)

You should see our bootloader prompt:

Bootloader prompt

If you do nothing, Lakka will boot in persistent live mode. You will be able to check if Lakka works on your hardware, without altering your PC’s hard drive or partitions. You can keep your USB pen and boot it on several PCs around you, it will keep your ROMs and your saves as expected, but it’s not the subject of this tutorial.

To setup Lakka on your target PC, type installer and hit Return.

Our splash screen will shortly appear:

Splash Screen

Followed by the installation wizard..

Installer menu

Choose Quick Install.

Installer - Quick Install

The installer will list your hard drives. On a typical Home Theater PC or NUC you should have only one.

Hard disk drive

The installer will copy the files to your target hard drive.

Installation process

At the end of this process, you will be asked to reboot. Choose Reboot and unplug your USB drive before it boots.

The system will expand the file-systems and reboot after 30 seconds. This happens only on the first boot. The system will automatically reboot and the rest of the boots should be fast.

If everything went OK, you should now be able to navigate Lakka Menu, our graphical interface:

Lakka menu

Congratulations, you have successfully installed Lakka!

You can now proceed to the final step.

———————————————————-

Just to Remember How to ...
-0 MrCjr 0-
h1

Tips: Menghilangkan Iklan saat Lock Screen di mi 1

Mei 8, 2018

Assalamualaikum Wr Wb,

Lt.29

mi a1

Okeh , back to our Time now …

Sekali lagi , ini cuman buat mengingat aja yah .. jadi kalau ada yang protes .. Saya Minta Maaf selaku Pemula ..

1. Liat aplikasi yang sedang yang jalan saat lock screen,

untuk mi a1 (garansi TAM) , saat lock screen ada 2 kali kita harus melakukan unclock , yang pertama ada :

> Muslim Go dan

> Touchpal

2. Cara mematikannya :

> Muslim Go ; Buka aplikasinya terus cari setting di icon bawah sebelah kanan, terus cari tulisan “Smart Locker”, matikan dengan menggeser ke sebelah kiri pada tombol , Done

> Touchpal : Buka setting, dan cari aplikasi Touchpal, dan lakukan “Paksa Berhenti”, Done

Selamat , semoga berhasil juga pada kalian yah …

 

by MrCjr